Images
Wattyl Killrust Epoxy Gloss Enamel Aerosol Paint - Black, 300g
byWattyl
Details
https://www.supercheapauto.co.nz/p/wattyl-wattyl-killrust-epoxy-gloss-enamel-aerosol-paint---black-300g/125288.html
Item No. 125288
$20.29
20.29
NZD
Additional Information
Description
Is this product for you?
Killrust is a superior performing paint that offers an anti-corrosive topcoat specially designed for metal surfaces like fences, gutters, gates, railings, down pipes and more! It provides durability and extreme metal protection in a gloss finish. No primer is needed, Killrust can be applied directly to the metal surface and helps protect against rust.
Features
- 300g
- Specifically designed for metal surfaces
- Superior performance, anti corrosive
- No primer required for new or lightly rusted surfaces
- Epoxy gloss enamel
Tech Spec
| Physical Properties: | |
|---|---|
| Volume: | N/A |
| Weight: | 300g |
| Colour / Finish: | Various Colours Available |
| Characteristics: | |
|---|---|
| Base: | Epoxy Enamel |
| Paint Type: | Top Coat |
| Heat Resistant: | N/A |
| Preparation: | |
|---|---|
| Surface Preparation: | Remove grease & oil by wiping down metal surface with Mineral Turpentine |
| Suitable Primer: | Killrust Heavy Duty Primer |
| Application: | |
|---|---|
| Application Method: | Aerosol |
| Suitable Substrates: | Metal |
| Thinning: | N/A |
| Thinning Ratio: | N/A |
| Recommended Application Temperature: | 10-35 degrees celsius |
| Recommended Application Humidity: | Below 80% |
| Finishing: | |
|---|---|
| Suitable Top Coat Clear: | N/A |
| Coverage: | |
|---|---|
| Coverage: | 3m2 per coat |
| Number of Coats Recommended: | 1 to 2 coats |
| Drying: | |
|---|---|
| Touch Dry Time: | 4-6 hours @ 25 degrees celsius & 50% relative humidity |
| Re-Coat Time: | 16 hours @ 25 degrees celsius & 50% relative humidity |
| Full Cure Time: | N/A |
| Clean Up: | |
|---|---|
| Clean Up: | Mineral Turpentine |