Images
Details
https://www.supercheapauto.co.nz/p/toolpro-toolpro-brake-cylinder-hone/609867.html
Promotions
Additional Information
Product Info
Product Info
The ToolPRO Brake Cylinder Hone is designed to prepare brake cylinder bores for reassembly, working on cylinder sizes from 19mm to 60mm. Three medium grit hone stones, each 28mm long, deglaze glazed bore walls and produce the smooth cross hatch pattern needed for proper caliper seating and even brake fluid distribution. Pair the hone with a variable speed drill to control the honing action and achieve a professional finish quickly.
An adjusting nut lets you vary the spring pressure and stone contact force, giving you control over how much material the hone removes and how evenly it cuts across the bore wall. This tool is an essential step in any brake system rebuild where the cylinders have been sitting long enough for the bores to glaze, and reusing cylinders rather than replacing them saves time and cost.
Features
- Three 28mm medium grit hone stones deglaze and smooth cylinder bore walls between 19mm and 60mm
- Pairs with a variable speed drill to quickly prepare brake cylinders before reassembly
- Adjusting nut varies spring pressure for controlled stone contact with cylinder walls
- Produces a smooth cross hatch pattern for caliper seating and even fluid distribution
- Medium grit stones suit deglazing glazed bores without excessive material removal
Tech Spec
| Hone Stone Size | 28mm |
|---|---|
| Hone Stone Grit | Medium |
| Cylinder Bore Range | 19mm to 60mm |
| Stone Count | 3 |
| Drive Method | Variable Speed Drill |