Images
Details
https://www.supercheapauto.co.nz/p/dba-5000-rotor-standard-kp-mitsubishi-evo-10mr-brembo-oe---f-no-nuts-supplied/SPO7426495.htmlPromotions
Additional Information
Product Info
Product Info
The DBA 5000 Series HD Brake Rotor Ring Front DBA52223.1 suits the Mitsubishi Lancer Evolution X (CJ). DBA52223.1 is the front friction ring for the 5000 Series HD rotor assembly fitted to 2007–2015 models with Brembo OE caliper variant. This ring replaces only the worn friction surface; the aluminium hat and mounting hardware are reused. It features the smooth, OE-style 5000 Series HD pattern with no slots, cross drilling or dimples, and includes an M6 lock nut for securing the ring to its hat.
The ring is machined from a premium grade of high-carbon cast iron for improved temperature management under repeated hard braking. Thermal efficiency centre-split core castings and a dedicated heat treatment cycle realign the iron's microstructure, lifting rotor stability and durability, while a CBN (cubic boron nitride) machine-turned finish keeps disc thickness variation to a minimum and reduces the risk of pad knock. TGHP paint stripes on the ring change colour at set temperatures, giving a visual check on operating heat during use.
Features
- Single replacement friction ring only, not a complete rotor, to suit Mitsubishi Lancer Evolution X (CJ)
- Supplied with M6 lock nut for hat assembly fitment
- Premium high-carbon cast iron formulation improves temperature management
- Plain OE-style finish suits drivers who don't need slotted, drilled or dimpled rotors
- TGHP paint stripes change colour to help monitor operating temperatures
- CBN machine-turned finish minimises disc thickness variation and reduces pad knock
- Heat treatment realigns the iron's microstructure for increased rotor stability and durability
- Thermal Efficiency Centre-Split Core Castings increase heat transfer and thermal efficiency
- Kangaroo Paw vane design increases heat dissipation by up to 20%
- 12 months/20,000km/12,000 miles warranty
Tech Spec
| Rotor Assembly Part Number | DBA52223.1 |
|---|---|
| Vehicle Fitment | Mitsubishi Lancer Evolution X (CJ), Brembo OE caliper variant, 2007-2015 |
| Position | Front |
| Diameter (mm) | 350 |
| Thickness (mm) | 32 |
| Slot/Drill Pattern | None (plain finish) |
| Vent Type | KP Vents (Kangaroo Paw) |
| Series | 5000 Series HD |
| Material | High-Carbon Cast Iron |
| Kit Contents | Single front friction ring with M6 lock nut (hat not included) |
| Warranty | 12 months / 20,000km / 12,000 miles |
| PCD (mm) | 201 |
| Number of Bolt Holes | 8 |