Images
Details
https://www.supercheapauto.co.nz/p/pioneer-pioneer-dash-cam-hardwire-kit-for-vrec-h120sc-h320sc-h520dc-z820dc/708161.htmlPromotions
Additional Information
Product Info
Product Info
The Pioneer Hardwire Kit for VREC-H120SC/H320SC/H520DC/Z820DC enables parking mode on compatible Pioneer drive recorders by wiring the camera directly to the vehicle battery. It converts the vehicle's 12V to 24V supply into a stable 5V DC output, and built-in low voltage protection cuts power at 11.8V to prevent the vehicle battery draining while the car is parked.
A 1 metre lead runs from the vehicle's power supply to the hardwire module, with a further 4 metre lead connecting through to the dash camera, giving enough reach for a tidy, concealed installation behind trim panels. A 2.5A fuse protects the wiring circuit, and the module operates in temperatures from -20°C to 60°C. It suits the Pioneer VREC-H120SC, VREC-H320SC, VREC-H520DC and VREC-Z820DC drive recorders.
Features
- Enables parking mode on compatible Pioneer drive recorders by wiring direct to the vehicle battery
- Converts the vehicle's 12V to 24V supply into a stable 5V DC output for the dash camera
- Built-in low voltage protection cuts power at 11.8V to prevent battery drain
- 2.5A fuse protects the wiring circuit
- 1m lead from vehicle power supply to the module plus a 4m lead to the dash camera for concealed routing
- Compatible with the Pioneer VREC-H120SC, VREC-H320SC, VREC-H520DC and VREC-Z820DC drive recorders
- Operates in temperatures from -20°C to 60°C
Tech Spec
| Accessory Type | Hardwire Kit |
|---|---|
| Compatible With | Pioneer VREC-H120SC, VREC-H320SC, VREC-H520DC, VREC-Z820DC drive recorders |
| Cable Length (m) | 1m (vehicle supply to module) + 4m (module to dash camera) |
| Voltage (V) | 12V to 24V input, 5V DC output |
| Low-Voltage Cut-off (V) | 11.8V |
| Fuse Type | 2.5A fuse |
| Kit Contents | 1x Hardwire Kit module, 1x Quick Start Guide |
| Dimensions (L x W x H mm) | 45mm x 70mm x 22mm (W x H x D) |