Images
Details
https://www.supercheapauto.co.nz/p/kincrome-kincrome-automotive-diagnostic-code-reader-obd2-can-enabled/699319.html
Promotions
Additional Information
Product Info
Product Info
The Kincrome Automotive Diagnostic Code Reader OBD2 CAN Enabled is a handheld OBD2 scanner for reading and clearing engine fault codes on most 1996 and later vehicles. The code reader works with OBD2 compliant cars, light-duty trucks, SUVs, vans and hybrids, and supports the J1850-PWM, J1850-VPW, ISO9141, KWP2000 (ISO 14230) and CAN (ISO 11898) protocols through a standard 16-pin OBDII connector.
Diagnostics cover generic, pending and manufacturer specific diagnostic trouble codes, with the ability to turn off the malfunction indicator lamp, review the emission readiness status of OBD monitors and read freeze frame data recorded at the moment a code was set. Live data streaming from the engine sensors suits chasing intermittent faults, and VIN, Cal ID and CVN identifiers can be pulled from the ECU on 2002 and newer vehicles that support Mode 9.
Kincrome built the unit to run stand-alone without a laptop: it draws DC 12V from the vehicle battery through the detachable OBD2 cable, so no batteries are required. The backlit LCD shows 2 lines of 8 characters, the housing measures 113 x 74 x 21mm and weighs 250g, and menus can be set to English, French, German, Polish, Spanish, Italian, Portuguese or Dutch.
Features
- Works with most 1996 and later OBD2 compliant cars, light trucks, SUVs, vans and hybrids
- Supports all OBD2 protocols including CAN, VPW, PWM, ISO 9141 and KWP 2000
- Reads and clears generic and manufacturer specific DTCs and turns off the check engine light
- Reads freeze frame data, a snapshot of sensor values captured when a DTC occurred
- Live data stream from engine sensors helps track down intermittent faults
- Retrieves VIN, Cal ID and CVN identifiers from the ECU where the vehicle supports it
- Reviews the emission readiness status of OBD monitors before a test
- Backlit 2 line LCD display shows 8 characters per line for clear reading
- Powered by the vehicle 12V battery through the detachable OBD2 cable, no batteries needed
- Menus in English, French, German, Polish, Spanish, Italian, Portuguese and Dutch
Tech Spec
| Vehicle Coverage | Most 1996 and later OBD2 compliant cars, light-duty trucks, SUVs, vans and hybrids |
|---|---|
| Protocols Supported | J1850-PWM, J1850-VPW, ISO9141, KWP2000 (ISO 14230), CAN (ISO 11898) |
| Functions | Reads and clears generic, pending and manufacturer specific DTCs, turns off MIL, freeze frame data, live data stream, emission readiness status, MIL status |
| Special Functions | Retrieves VIN, Cal ID and CVN identifiers from the ECU on 2002 and newer vehicles supporting Mode 9 |
| Connectivity | OBDII 16-pin connector via detachable cable |
| Power Source | DC 12V supplied by the vehicle battery through the OBD2 cable |
| Languages | English, French, German, Polish, Spanish, Italian, Portuguese, Dutch |
| Display | Backlit LCD, 2 lines, 8 characters each |
| Operating Temperature | 0 to 50°C |
| Dimensions (L x W x H) | 113 x 74 x 21mm |
| Weight | 250g |