Images
Clingtape Body Moulding Tape - 12mm x 4m
Details
https://www.supercheapauto.co.nz/p/clingtape-clingtape-body-moulding-tape---12mm-x-4m/299060.html
$10.99
^
$0.00
Promotions
Special Offer
Only select SCA stores can do fitments, please enter your location to see the closest.
Item No. 299060
Additional Information
Product Info
Product Info
Clingtape, Automotive Body Moulding Tape is a 12mm wide, strong and durable tape designed for re-attaching loosening or almost loosening rubber or vinyl side mouldings, trim and emblems back onto your exterior car body before they peel off completely. Due to its adhesive strength moulding tape will adhere to different surface contours and can handle various degrees of expansion and contraction. Perfect for outdoor use, the product will not absorb moisture and is resistant to extreme weather.
Directions:
Tips for use:
Directions:
- Clean both surfaces using a 50:50 mixture of Isopropyl alcohol (IPA) and water. Allow to dry.
- Apply tape to car, use thumb to apply pressure to tape to allow for total surface contact to develop.
- Peel off backing tape
- Apply trim to tape. Again, using your thumb this time, apply firm pressure along the length of the trim part.
Tips for use:
- Ideal application temperature range is 21°C to 35°C. Minimum application temperature is 10°C.
- After application, the bond strength will slowly increase as the adhesive on both sides of the tape flows out to make good contact with the bonding surfaces.
- At room temperature this will take up to 24 hours to develop 90% of its final strength.
- During that time, the trim will need to be supported depending on its shape and overhang.
Features
- 12mm x 4m
- Double sided
- Clingtape Automotive Moulding Tape is excellent for mounting rubber protectors, trimmings and badges
- Temperature resistant
- Not recommended for parts made of Polycarbonate, Acrylic, Thermoplastics, Polyphenylene Oxide Plastic or Polypropylene.