Details
https://www.supercheapauto.co.nz/p/aerpro-control-harness-c-for-mazda/SPO3763532.htmlPromotions
Additional Information
Product Info
Product Info
The Aerpro Steering Wheel Control Interface to Suit Mazda Various Models CHMZ12C allows an aftermarket head unit to be installed while retaining use of the factory steering wheel controls. It suits various Mazda models that are not fitted with an OEM Bose amplified audio system, and connects directly into the existing vehicle wiring using a vehicle specific plug, so no cutting of the factory wiring harness is required. The interface is CANBUS compatible and supplies output feeds for reverse trigger, park brake, speed pulse, illumination and amp remote.
A separate Aerpro SWC patch lead, Patch Lead Type C, is required alongside this interface to enable the steering wheel control functions with the new head unit, and the aftermarket head unit itself must be steering wheel control compatible for these functions to work. Installation can be simplified further with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket head unit and this steering wheel control interface.
Features
- Allows an aftermarket head unit to be installed while retaining factory steering wheel controls
- Suits various Mazda models without an OEM Bose amplified audio system
- CANBUS compatible interface requires no additional modules
- Provides output feeds for reverse trigger, park brake, speed pulse, illumination and amp remote
- Fitted with a vehicle specific plug for installation with no cutting of factory wiring
- Requires a separate SWC patch lead, Patch Lead Type C, to enable steering wheel control functions
- Compatible with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead
- Not compatible with Bose amplified audio systems
Tech Spec
| Vehicle Fitment | Mazda, various models (excludes vehicles fitted with OEM Bose Amplified Audio Systems) |
|---|---|
| Connector Type | Vehicle specific plug, Patch Lead Type C |
| Patch Lead Required | Yes, a separate SWC patch lead is required to enable steering wheel control functions (sold separately) |
| Wiring Modification Required | No, the harness connects directly into existing vehicle wiring with no cutting of the factory wiring harness required |