Gates | Supercheap Auto New Zealand

Driven by Possibility

Gates keeps industry running. From process and specialist manufacturing to mining, and everything in between, Gates’ industrial belt and power transmission solutions and hydraulic and hose systems help the world’s leading companies outperform the competition. Investing hugely in world-beating R&D means that Gates products not only outperform industry standards; they exceed customers’ demanding expectations. And best of all? Gates distils all that knowledge, experience, research and technology into a wide range of products to suit your car. Gates’ complete aftermarket solutions feature first-to-market and late model coverage on systems such as accessory drives, engine timing, fuel, cooling and more. Gates parts are designed specifically for OEM quality and to meet and exceed the performance requirements of your vehicle.

Micro-V® Kits

Gates Micro-V® Kits make it easy to restore the entire accessory belt drive system. Fix your vehicle the first time by servicing the entire serpentine drive. Neglecting to replace the tensioner and pulley(s) at the same time you replace the belt can ultimately shorten the life of the belt as well as other front-end accessory components. Each kit contains a Gates OE-equivalent belt, tensioner, idler pulley, and necessary hardware with installation instructions and tech tips for easy, accurate installation to virtually every vehicle on the road today.
*Depending on application, kit contents may not include all parts mentioned.

Designed for convenience, easy parts sourcing, and reduced chance of system failure.
Includes multi-ribbed belt with premium EPDM construction.
Meets or exceeds OE standards in form, function, and fit.

Timing Component Kits

Get the added security of a warranty that is exactly the same as that offered on new vehicles with Gates Timing Component Kits. Why take a chance? With Gates timing Component Kits, you can avoid warranties and comebacks by replacing all critical system components at the same time. Replacing all wear items in the timing system each time a belt is replaced is recommended by Gates. Since the large part of the replacement cost is in the labour involved in changing a timing belt, it makes sense to replace all the components at the same time.

All moving components in the timing system are subject to wear and need to be replaced. Committing to replace the Timing Belt AND all Timing Components at EVERY specified service interval means Automotive Technicians will deliver a healthy engine to vehicle owners and reduce the risk of costly engine damage. Above all, it secures their reputation as an expert in their field. At Gates, we understand the challenges and design every Timing Component Kit with the automotive technician in mind. Our goal is to make timing system servicing easier, faster, and of course, reduce the risk of warranty claims and come backs.

Timing Component Kits

Water Pumps

It is the water pump’s job to constantly circulate the coolant throughout the entire cooling circuit and thus regulate the coolant flow rate. A paddle-style impeller rotating on a bearing-supported shaft is responsible for moving the coolant. The impeller shaft is most commonly driven externally by a pulley/belt combination.

Reliable Operation:

Gates are prime manufacturers of Water Pumps allowing better control of the manufacturing process and quality of product.
Gates Water Pump components, such as the seals and bearings, are 100% leak tested. The finished product is also 100% leak tested for both the casting and assembled water pump.
You can be confident Gates Water Pumps will perform exactly as they should.

Genuine Performance:

Gates is an original equipment manufacturer (OEM). This helps ensure that products perform exactly as the original supplied to car manufacturers.
Water Pumps use unitised bearings and seals for longer service life, and have precision ground surfaces for proper fit and sealing.
This product is backed by a strong warranty (2 years / 40,000 kms).

Coolant Hose

Gates coolant hose is available in factory moulded and modular hose varieties. Gates hose features:

Recommended for upper, lower, by-pass, heater and other coolant hose applications.
Heat and ozone resistant cover.
Engineered to resist electrochemical degradation - the leading cause of hose failure.
SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature rating: -40° C to 135° C in coolant hose applications.

Coolant Hose

Gates coolant hose is available in factory moulded and modular hose varieties. Gates hose features:

Recommended for upper, lower, by-pass, heater and other coolant hose applications.
Heat and ozone resistant cover.
Engineered to resist electrochemical degradation - the leading cause of hose failure.
SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature rating: -40° C to 135° C in coolant hose applications.

Thermostats

Gates offers a full range of thermostats to cover a variety of vehicles, from conventional wax thermostats, to housed thermostats and the latest map-controlled wax thermostats. Housed thermostats come complete with their optimally designed housing, making installation a breeze.

Gates thermostats feature:

Smart part numbering that tells you the part number, opening temperature and combination of included gaskets and seals, so you know straight away which thermostat you are buying.
Each thermostat is packed with the matching seals and gaskets, covering more than just one application, simplifying your inventory and removing the need to source gaskets, thermostats and seals separately - making your job more convenient!
The first in the industry to supply thermostats in Celsius.

Supercheap Auto

Shop by Vehicle

Shop Your Way

Our Services

Help Desk

Supercheap Auto

Connect with us

Driven by Possibility

Shop by Vehicle

Shop by Vehicle

Price

Availability

Brand

Top Rated