This heat shield insulation material is easier to install than exhaust wrap, it also reduces more heat from your exhaust pipes and components. Heatshield Armor™ which can stop exhaust heat up to 70 percent.

The outer armor of Heatshield Armor is resistant to the elements is a 4 mil this aluminium, gives the exhaust heat shield a long life. Our exclusive BioCool insulation material as the inner pad, bonded to a heavy-duty foil outer layer using a proprietary process. This makes it capable of withstanding 982 degrees continuously, which allows this heatshield to be placed directly on exhaust systems, turbo manifolds, downpipes and diesel particulate filters (check with state regulations regarding usage on DPF). Because this heat shield installs directly on the exhaust system components, it performs better than the clamp-on standoff heatshields that allow heat to escape because they are set above the pipe and not directly insulating it.

Heatshield Armor offers superior performance over all metal exhaust heat shields. The metal heat shields have conduction with one hot side and one cold side: There is no metal-to-metal contact layer it uses a thermal break to create a real cold side.

BioCool is a non-caustic, non-flammable bio-soluble silica thermal insulation material. It doesn't cause itching and won't smoke/smell the first time it is heat-cycled. This exhaust heat shield material is flexible, easy to cut and may be cleaned after installation. Heatshield Armor is available in two thicknesses: 1/4-inch for most naturally aspirated applications and 1/2-inch for forced-induction and racing applications.

Features: