Clearance
Images
Dupli-Color Caliper Paint, Red - 340g
Details
https://www.supercheapauto.co.nz/p/dupli-color-dupli-color-caliper-paint-red---340g/324038.html
Now
$27.00
$0.00
Promotions
Special Offer
Only select SCA stores can do fitments, please enter your location to see the closest.
Item No. 324038
Additional Information
Product Info
Product Info
Customising your brake calipers couldn't be easier! Dupli-Color Caliper Paint is a protective, durable coating that is resistant to cracking, chipping, brake dust and automotive chemicals. The high gloss coating contains ceramic resins allowing it to withstand temperatures of up to 260°c (500°F).
Safety instructions for removing lid:
To open insert a ¼” wide flat-blade screwdriver in slot,
Remove by rotating the handle of the screwdriver
Customer 18+
Safety instructions for removing lid:
To open insert a ¼” wide flat-blade screwdriver in slot,
Remove by rotating the handle of the screwdriver
Features
- Durable protective coating resistant to chipping, brake dust & automotive chemicals
- Resists temperatures up to 500°F (260°C)
- Fast drying, durable finish
- Use on brake calipers, drums & rotors
Tech Spec
Duplicolor Aerosol Paint - Caliper Paint, Red, 340g
| Volume: | N/A |
|---|---|
| Weight: | 340g |
| Colour / Finish: | Various Colours Available |
| Characteristics: | |
|---|---|
| Base: | Enamel |
| Paint Type: | Base Coat |
| Heat Resistant: | 260 degrees celsius |
| Preparation: | |
|---|---|
| Surface Preparation: | Sand surface to remove any rust and clean with Wax & Grease Remover |
| Suitable Primer: | N/A |
| Application: | |
|---|---|
| Application Method: | Aerosol |
| Suitable Substrates: | Metal |
| Thinning: | N/A |
| Thinning Ratio: | N/A |
| Recommended Application Temperature: | 10-30 degrees celsius |
| Recommended Application Humidity: | Below 80% |
| Finishing: | |
|---|---|
| Suitable Top Coat Clear: | N/A |
| Coverage: | |
|---|---|
| Coverage: | 1-1.5m2 |
| Number of Coats Recommended: | 2 coats |
| Drying: | |
|---|---|
| Touch Dry Time: | 20 minutes |
| Re-Coat Time: | 4 hours |
| Full Cure Time: | 3-4 days |
| Clean Up: | |
|---|---|
| Clean Up: | Enamel Thinner or Mineral Turpentine |