The ToolPRO 1/2" Drive Angular Torque Gauge is a specialist tool often required in engine rebuilding.

Angular Torque Wrench

Suitable for: 1/2" extension bars & sockets




Step 1

To use this gauge, you will require

  • Breaker bar
  • Socket to suit the fastener
  • Small extension if needed
  • Angular torque gauge

Step 2

Start by checking the specifications for the bolt you are looking to tighten.

Step 3

With the socket attached to the torque gauge, position the socket on the fastener.


Brace the adjustable arm against an existing nut or fixture, or in a bolt hole to prevent the gauge from moving.

Step 4

Now, with the breaker bar inserted in the top of the gauge – tighten the fastener until the needle reaches the desired setting.

Thats it! Simple!

*IMPORTANT INFORMATION* - Read to find out more about terms and conditions*