Is this product for you?
In many automotive and mechanical applications, it becomes critical to have a specific torque amount for bolts that differ in size or are fastening important components. A torque wrench is designed to indicate when a particular torque spec has been reached when tightening a bolt, so that the user can ensure the accuracy of that torque amount. A torque wrench is typically much longer than a standard ratchet or breaker bar so as to provide enough leverage to reach high torque amounts, however there are many different sizes in torque wrenches for a variety of different applications.
Where can this product be used?
The ToolPro 1/4‚Äù Drive Torque Wrench is designed for small torque amounts of approximately 6 - 30Nm (40-250 inch/lbs). While there are other torque wrenches in the range that will reach below 30Nm, having a wrench specifically for this range will provide a more accurate reading as it uses more frequent increments. This wrench is the only one in the range that works in inch pounds. The scale around the handle helps you to obtain a setting down to single inch pounds, or turn the torque wrench over and the scale gives you accurate adjustment down to point zero one of a newton metre
How easy is it to use?
Before setting the torque wrench, make sure you unlock it by sliding the lock on the handle. When using a torque wrench, the ratcheting mechanism will help you get the fastener close to the correct torque quickly. Once the fastener becomes tight, apply steady, even pressure until the torque wrench clicks. Release and apply pressure gently until the torque wrench clicks a few more times to ensure that you have reached the correct tension.