If you're got a decent pressure washer and you have a car to clean, consider using a foam spray cannon. This is a great, simple way to start the cleaning process on your vehicle by coating it in a thick car wash to lift dirt and grime from the vehicle. Meguiar's have suggested 2 methods for NO-Touch lightly dirty wash & a moderately dirty wash.
Step 1 - NO-Touch method for cleaning lightly dirty vehicles
Add 100ml of Gold Class to 900ml of water into your foam spray cannon bottle then attach bottle to the spray attachement.
Make sure to mix the solution carefully so you have an even consistency.
Attach the foam spray cannon to your high pressure washer and test spray the pattern, adjust the pattern using the volume nozzle on top and the spread nozzle on the front to the desired spray.
Start spraying the foam from the bottom of the vehicle side to side then upwards.
Then leave the foam to soak into the dirt for 2 - 3 minutes to help lift the dirt from the paint.
Rinse from the top down to help flow of dirt fall straight off the car.
Then dry the car using a clean blower.
Step 1 - Best way to clean moderately dirty vehicles
Park you vehicle in the shade before tackling this job.
To ensure you don't get swirl marks from hand washing, pre-rinse the vehicle to take off light dirt and start to cover the vehicle in foam from bottom to top.
Lather the a sponge or wash pad with car wash and work from the top down to work the dirt off the vehicle.
As the sponge or washpad becomes dirty, rinse the pad with clean water as you go and contine to wash the vehicle, do the wheels last to ensure no brake dust ends up on your paintwork.
Once the car has been washed, rinse the car from the top down to help rinse any left over dirt.
Then dry the vehicle with a good quality chamois, rerinse if dirt is still visable and dry again.
Once the car is dry, stand back and admire what you've accomplished
*Important information* - Click here to read more about our How-To terms and conditions.